PMII Certified

IICRC approved CE training
Approved CE Training


National Association of Mold Remediators and Inspectors NAMRI

National Non-profit Certifying Body for Mold Professionals

mold E&O insurance

Course Manager Contact Us Enroll/Order 

Professional Mold Inspection Institute Professional Mold Inspection Institute

PO Box 303 Madison, SD 57042Get Mold Certified Today!800-679-4381

USA CanadaHours 8am - 8pm CST, Mon-Fri

Air Scrubber 200 / Negative Air Machine

Special Order Only

Great for Restoration Companies or Ozone/Hydroxyl Remediation
Performs one complete air change per hour (ACH) for 1,500 sq. ft. with 8 ft. ceilings

The Air Scrubber 200 is a combination air scrubber / negative air machine for a variety of uses. It can handle general air scrubbing to remove dust and oxidized particles or specialized mold remediation projects using one or more units depending on the size and scope of the project.

Excellent for use during water damage restoration, ozone/hydroxyl remediation clean-up or for creating negative air during mold remediation work. The Air Scrubber 200 contains a combination odor-neutralizing pre-filter to trap larger particulates and a High Efficiency Particulate Air (HEPA) filter to trap particles down to 0.3-microns.

Air Scrubber Function:
The unit employs a high static pressure centrifugal fan that moves air at just over 200 cubic feet per minute (CFM), well within the flow rate for the fitration media. For mold remediation, one unit can cover a maximum of 375 sq. ft. with 8-foot ceilings (3,000 cu. ft.) at 4 air changes per hour (ACH), the recommended minimum for the IICRC S520 mold remediation guidelines, or 250 sq. ft. at 6 ACH.

For larger mold remediation jobs or other projects, rather than using a single, high CFM air scrubber rated for the entire volume of the work area, several smaller units dispersed throughout the space are more effective because stale pockets of air may never a central air scrubber on their own. High CFM air scrubbers can also overwhelm their filter media quickly and require more frequent filter replacement, which can be expensive.

Negative Air Function:
The Air Scrubber 200 is ductable in and ductable out with a gasket-sealed enclosure, so that contaminated air that enters through the 8-inch in-duct can only exit through the 5-inch out-duct. During a mold remediation project, the unit is attached to the outside of the containment area. It draws contaminated air from containment and exhausts filtered air outside the containment area. For larger containment areas, multiple units can be used to create and maintain required negative pressure.

The machine's high static pressure centrifugal fan runs quietly, making it a good choice for use in an occupied home where excess noise can be an issue. Also a good solution for scrubbing indoor air when ozone machines or hydroxyl generators are running and creating numerous oxidized particles in the air.

The Air Scrubber 200 is simple to operate and will never become obsolete. It uses low-cost, high-quality generic HEPA filter replacements rather than expensive proprietary filters. Includes a straight-blade power Inlet that accepts standard extension cords for convenience, and a GFCI-protected outlet to connect additional equipment.

Like all BoiE products, the Air Scrubber 200 was designed by professionals for professionals to be a field-ready workhorse that exceeds, outlasts and outperforms the competition.


  • Unbreakable, stackable rugged case
  • Padlock holes for added security
  • Folding handle for easier storage
  • IPX7/MIL-STD810F and 512.4/IP6X Certifications
  • HEPA Filter with built-In odor neutralizing particle pre-filter
  • Low-cost, common-sized, generic HEPA filter replacements
  • Air Scrubber / Negative Air functionality
  • In and Out flanges to connect to containment area or ducting
  • Removal in-duct for easier transportation and storage
  • Quiet UL listed centrifugal blower with overload-protection
  • Marine-grade straight blade inlet receptacle fits extension cords
  • GFCI-protected electrical outlet and internal wiring
  • Marine-grade tin-plated copper wiring
  • Waterproof heat shrink electrical crimp connectors
  • BoiE warranty which exceeds the industry standard


Type of Use:

Air Scrubbing and Negative Air

Case Material:

Rugged polymer with stainless steel hinge pins

Case Type:

Crush-resistant, stackable, lockable, lifetime guarantee

Case Ratings:

IPX7/MIL-STD810F 512.4/IP6X Certifications


1-position, stand upright




1,500 sq. ft. with 8' ceilings at 1 ACH


HEPA with built-in pre-filter

Air Scrubber:


Negative Air:

Yes, 8-inch in-duct, 5-inch out-duct


206 CFM (max), centrifugal

Electrical Rating:

120V~60Hz 1.3 Amps

Power Connection:

Straight Blade Inlet Receptacle, Marine-grade

Accessory Outlet:

Yes, GFCI-protected

Power Switch:



15 x 12 x 10 inches


15 lbs


20 ft. grounded power cord

30-Day Money-Back Guarantee
The only mold inspection and remediation training with a satisfaction guarantee!